Chemical finishSafetyComplianceContract
Flame-Retardant
The treatment that slows ignition and flame spread for contract safety
Slows ignition and flame spread
A flame-retardant (FR) finish reduces a textile's ignitability and the speed at which flame spreads, helping it meet fire-safety regulations. It is a compliance-critical treatment for contract and hospitality textiles such as curtains, drapery and upholstery.
Flame-retardant finishes do not make a fabric fireproof; they slow ignition and flame spread and promote self-extinguishing, buying time and limiting fire growth. They work by chemistry — releasing flame-quenching gases, forming a protective char, or both.
In contract and public spaces, fire performance is commonly required by regulation, fire risk assessment or insurer, and the applicable tests depend on the country and the product — in the UK, for example, BS 5867-2 (Type B or C) for curtains and drapes, and BS 5852 ignition source 5 ("Crib 5") for upholstered seating. Crib 5 is a composite test: the cover fabric is tested together with a specified filling, so the result applies to that fabric-and-filling combination, not to the fabric on its own. Treatments can be durable (wash-resistant) or non-durable, and some fabrics achieve FR inherently through the fiber rather than a finish.
Technical sheet
TypeChemical (flame-retardant)
Applied toCurtains, drapery, upholstery fabrics
ProcessPad-dry-cure or back-coating
PermanenceDurable or non-durable grades
Primary effectSlows ignition and flame spread
Common onContract drapery, upholstery, bedding
What this finish does
01Raises the fabric's resistance to ignition
02Slows the spread of flame across the surface
03Promotes self-extinguishing once the source is removed
04Helps meet contract fire-safety standards
05Available in wash-durable grades for laundered items
Common uses
01Contract and hotel curtains and drapery
02Upholstery for public and commercial spaces
03Theater, event and exhibition textiles
04Healthcare and care-home bedding
05Transport and marine textiles
Advantages
01Enables compliance with fire-safety regulations
02Slows fire growth and improves escape time
03Available as durable, wash-resistant grades
04Can be applied to many existing fabrics
05Essential for contract and public-space specification
Limitations
01Does not make fabric fireproof
02Some legacy chemistries raise health/environmental concerns
03Non-durable finishes wash out and need reapplication
04Can affect hand, color or drape
05Must be tested and certified to the right standard
Applications
Flame-retardant finishing is compliance-critical in contract and hospitality interiors, where curtains, drapery and upholstery are generally required to pass defined fire tests before they can be installed in public spaces, with requirements that vary by country and building use. The specification hinges on the exact standard (for example BS 5867-2 Type B for drapes, or BS 5852 Crib 5 / BS 7176 for upholstered seating, tested as a fabric-and-filling composite) and on durability — whether the fabric will be laundered or dry-cleaned. Chemistry matters too: modern formulations avoid restricted halogenated FRs, and OEKO-TEX® helps confirm residue safety. Inherently FR fibers are an alternative where a finish is undesirable.
ContractHospitalityHome fashionSustainable fashionFashion
Care & durability
01Confirm whether the FR finish is durable or non-durable
02Launder or dry-clean only by the method the finish allows
03Non-durable finishes must be reapplied after cleaning
04Keep test certificates for compliance and audits
05Avoid treatments or softeners that can strip the finish
Sustainability & certifications
FR chemistry has a history of problematic substances; some halogenated and antimony-based FRs are restricted. Phosphorus- and nitrogen-based and inherently FR fibers offer better profiles. Durable finishes avoid repeated reapplication. OEKO-TEX® certification and compliance with REACH and restricted-substance lists verify responsible chemistry.
Frequently asked questions
Does a flame-retardant finish make fabric fireproof?+
No. It slows ignition and flame spread and helps the fabric self-extinguish, improving safety and escape time. No textile finish makes a fabric truly fireproof.
What is the difference between durable and non-durable FR?+
Durable FR finishes resist washing and dry-cleaning and are used on laundered items. Non-durable finishes wash out and must be reapplied, so they suit items that are rarely cleaned or are professionally re-treated.
When is a flame-retardant finish legally required?+
It depends on the country, the type of building and the product. In UK contract interiors such as hotels, theaters and healthcare, curtains are typically specified to BS 5867-2 and upholstered seating to BS 7176, which applies the BS 5852 Crib 5 source to the fabric-and-filling composite. Other markets use different tests (for example NFPA 701 in the US or EN 13773 in Europe for drapery), so confirm the standard that the venue, fire authority or insurer requires.
Need flame-retardant on your textiles?
Vanvino® can advise you on finishes, performance specifications and minimum order quantities for your project.
Request advice