DurabilityTested propertyPilling1–5 grade
Pilling Resistance
How well a fabric resists the little surface bobbles of wear
Pilling / surface fuzzing resistance
Pilling resistance measures how well a fabric resists forming 'pills' — the small tangled balls of fiber that gather on a surface with wear and washing. It is assessed by abrading the fabric under controlled conditions and rating the result against photographic standards on a 1-to-5 scale, where 5 is no pilling and 1 is severe pilling.
Several methods exist. The Martindale pilling test (ISO 12945-2) rubs fabric against itself on the Martindale machine; the pilling box test (ISO 12945-1) tumbles specimens in a cork-lined box; the random tumble test (ASTM D3512) tumbles them with abrasive in a chamber. After a set number of cycles, the surface is compared to photographic or descriptive standards and given a grade from 1 (severe) to 5 (none).
Pills form when short or weak fibers work loose, tangle and stay anchored by stronger fibers — so staple fibers, low-twist yarns and blends of fibers with different strengths pill most. Anti-pill finishing (such as bio-polishing) removes the loose surface fibers in advance. Pilling is a major appearance-retention concern for bedding, knitwear and upholstery, specified separately from abrasion resistance because a fabric can resist wear yet still pill.
At a glance
PropertyPilling / surface fuzzing resistance
Measured inGrade 1 (severe) to 5 (none)
MethodsMartindale, pilling box, random tumble
Key standardsISO 12945, ASTM D3512
Applies toWovens and knits
Improved byAnti-pill finishing (e.g. bio-polishing)
Characteristics
01Rates formation of surface pills
02Graded 1 (severe) to 5 (none)
03Martindale, pilling-box or random-tumble methods
04Worst on staple fibers and low-twist yarns
05Separate from abrasion resistance
Typical uses
01Bedding and sheeting appearance retention
02Knitwear and jersey
03Upholstery and soft furnishings
04Quality control against a target grade
05Validating anti-pill finishes
Strengths
01Simple 1–5 grade, easy to specify
02Targets a top appearance complaint
03Standardized across ISO and ASTM
04Multiple methods for different fabrics
05Confirms anti-pill finishing works
Limitations
01Grading has a subjective element
02Methods and cycles affect the grade
03Good abrasion doesn't guarantee good pilling
04Lab pilling isn't identical to real use
05Method and cycle count must be stated
Where it applies
Pilling resistance targets one of the most common appearance complaints — the bobbly surface that makes bedding, knitwear and upholstery look worn before their time. It is graded on a simple 1-to-5 scale, which makes it easy to put in a specification. Because a fabric can resist abrasion yet still pill, specify pilling separately (ISO 12945 / ASTM D3512) with the method and cycle count stated, and remember anti-pill finishing such as bio-polishing can lift a fabric's grade.
Home fashionHospitalityFashionContract
Frequently asked questions
What does a pilling grade of 4–5 mean?+
Pilling is rated 1 to 5 against photographic standards, where 5 means no pilling and 1 means severe pilling. A grade of 4 or 4–5 indicates slight to no pilling and is a typical acceptance target for quality bedding and knitwear.
Why do some fabrics pill more than others?+
Pills form when short or weak fibers work loose and tangle but stay anchored by stronger fibers. Staple fibers, low-twist yarns and blends of fibers with different strengths (such as
cotton-polyester) pill most; smoother, higher-twist and anti-pill-finished fabrics pill least.
Does good abrasion resistance mean low pilling?+
Not necessarily. Abrasion resistance and pilling are different behaviors, so a hard-wearing fabric can still pill. They are tested and specified separately, though both can be run on the Martindale machine.
Sourcing with pilling resistance?
Vanvino® can source, specify and document textiles to your exact construction and quality requirements.
Request advice