DurabilityTested propertyAbrasionISO 12947
Martindale Abrasion
The rub-cycle test that rates how long a fabric survives wear
Abrasion resistance
The Martindale abrasion test rates a fabric's resistance to surface wear by rubbing it against a standard abrasant in a figure-of-eight motion under a set load, counting the cycles ('rubs') until the fabric fails. It is the dominant abrasion standard in Europe and the reference specification for upholstery and contract durability, reported as a Martindale rub count.
In the test (ISO 12947 / ASTM D4966), specimens are mounted on the Martindale machine and rubbed against a wool abradant or wire screen under a defined weight (usually 9 or 12 kPa) in a continuously changing figure-of-eight path, so wear is even and multidirectional. The result is the number of rubs to a defined end point — commonly thread breakage or noticeable wear.
Martindale counts translate into familiar durability tiers for upholstery: roughly 10,000–15,000 rubs for decorative/light domestic use, 15,000–25,000 for general domestic, 25,000–30,000+ for heavy domestic, and 40,000+ for commercial/contract use. The same machine, with a different setup, also runs the Martindale pilling test. Because national conventions and end points vary, the standard and rub target must always be stated.
At a glance
PropertyAbrasion resistance
Measured inMartindale rubs (cycles) to failure
MotionFigure-of-eight under set load
Key standardsISO 12947, ASTM D4966
Applies toUpholstery, apparel, contract textiles
Contract guide40,000+ rubs typical
Characteristics
01Rubs fabric against an abradant in figure-of-eight
02Counts cycles to a defined failure point
03Even, multidirectional wear under set load
04Dominant abrasion standard in Europe
05Same machine also runs pilling tests
Typical uses
01Upholstery and contract furniture
02Hospitality seating and bedding
03Apparel subject to wear
04Durability acceptance testing
05Rating fabrics into use tiers
Strengths
01Objective, widely recognized durability figure
02Even, realistic multidirectional wear
03Clear tiers for specifying upholstery
04Standardized (ISO 12947)
05Comparable across suppliers when method stated
Limitations
01End point and load affect the result
02High rub counts don't guarantee no pilling
03Lab wear is not identical to real use
04Not directly comparable to Wyzenbeek double rubs
05Standard and target must be stated
Where it applies
Martindale is the abrasion specification that decides whether a fabric is fit for its setting — decorative, domestic, heavy-domestic or commercial/contract — and it is the European reference for upholstery and hospitality seating. Buyers match the rub count to the use tier (for example 40,000+ for contract). Because the result depends on the load and the chosen failure end point, and because Martindale rubs are not interchangeable with Wyzenbeek double rubs, always state the standard (ISO 12947) and the target.
HospitalityContractHome fashionFashion
Frequently asked questions
How many Martindale rubs do I need?+
As a rough guide for upholstery: 10,000–15,000 for decorative/light use, 15,000–25,000 for general domestic, 25,000–30,000+ for heavy domestic, and 40,000+ for commercial/contract use. The exact target should follow the relevant standard and the project's requirements.
What is the difference between Martindale and Wyzenbeek?+
Both rate abrasion resistance but differ in method and are not interchangeable. Martindale (ISO 12947) rubs in a multidirectional figure-of-eight and counts 'rubs'; Wyzenbeek (ASTM D4157) rubs back-and-forth in straight lines and counts 'double rubs'. A conversion between the two is unreliable, so specify one method.
Does a high Martindale count mean the fabric won't pill?+
Not necessarily. Abrasion resistance and pilling are different behaviors. A fabric can survive many rubs yet still pill, so pilling is tested separately (often on the same Martindale machine with a different setup).
Sourcing with martindale abrasion?
Vanvino® can source, specify and document textiles to your exact construction and quality requirements.
Request advice