Beta version — entries are being reviewed and expanded. Corrections are welcome at hello@vanvino.store.
BathTerry / velourCottonSpec guide

Towels

How bath, hand and face towels are built — and how to specify them for production
Bath — towels
A towel is an absorbent bath textile, most often woven in cotton terry: a pile fabric whose loops hold water. To order towels for production you specify a short list of parameters — format and size, composition and cotton quality, construction, pile yarn, weight, color method, make-up and certification — and each one changes how the towel feels, performs and costs.

A typical production request reads like this: hand towel, 50×100 cm (20 × 39 in), 100% combed cotton, terry, pile yarn 16/1 zero-twist, 550 g/m² (16.2 oz/yd²), garment-dyed pink, dobby border, OEKO-TEX® STANDARD 100. Every part of that line is a decision, and this page explains what each one means so a request can be written — or read — with confidence.

The same logic applies to every format in the set, from the face cloth to the bath sheet. Hospitality programs usually specify the whole set in one quality, so that face, hand and bath towels and the bath mat match in color, hand and weight.

How it is made

Terry toweling is woven with two sets of warp yarns and one weft. The ground warp is held under tension and forms the base cloth with the weft; the pile warp is fed slack, and a special terry motion on the loom beats up the weft in groups — usually every three picks — pushing the slack yarn into loops on one or both faces.

Where the loops are suspended, the cloth is woven flat: this is the border (or band), often in a dobby or Jacquard pattern, and the plain ends that are folded into hems. After weaving, the towel is dyed or washed, cut, hemmed and labeled.

01Terry — uncut loops on one or both faces — the reference towel construction, absorbent and soft.
02Velour — terry with the loops sheared on one face for a smooth, velvety surface that takes prints well; slightly less absorbent on the sheared side.
03Jacquard terry — patterns or logos formed by the loops themselves, woven on a Jacquard loom.
04Waffle and flat-woven — no pile: a honeycomb or flat structure that is lighter and dries faster — used for spa, kitchen and hammam towels.
05Border and hems — the flat-woven band (plain, dobby or Jacquard) and the folded, stitched ends and sides that finish the towel.

How to specify it

The parameters a production order should state, what each one means and the most common options.

ParameterWhat to stateCommon options
Format & sizeTowel type and finished size in cmFace 30×30 · Guest 30×50 · Hand 50×90 / 50×100 · Bath 70×140 · Bath sheet 90×150 / 100×150 · Bath mat 50×70 — see the size guides
CompositionFiber content as it will appear on the label100% cotton (most common) · cotton/polyester ground for hard-wearing hospitality use · cotton with lyocell, modal or viscose pile for extra softness · linen/cotton for flat towels
Cotton qualitySpinning preparation and cotton originCarded (economical) or combed (smoother, less lint) · long-staple grades such as Egyptian or Pima · organic or recycled
ConstructionPile structure and facesTerry two-sided or one-sided · velour · Jacquard terry · waffle · flat-woven
Pile yarnCount, ply and twist of the loop yarnCount in Ne with ply: 16/1, 20/1 (single) · 20/2, 24/2 (two-ply, more durable) · twist: standard, low-twist or zero-twist (softest, most absorbent)
WeightGrams per square meter (or grams per piece)400–450 g/m² (11.8–13.3 oz/yd²) light and quick-drying · 500–600 g/m² (14.7–17.7 oz/yd²) hospitality standard · 650–700 g/m² (19.2–20.6 oz/yd²) and above plush and premium
ColorShade and how the color is appliedWhite (with or without optical brightener) · piece-dyed or garment-dyed solid · yarn-dyed stripes, checks or Jacquard · printed (usually on velour) · give a Pantone TCX reference and the color fastness required
FinishTreatments after weavingHydrophilic softener (keeps absorbency) · pre-washed for low lint and stable size · optional antimicrobial or odor-control finish
Make-upBorder, hems and trimsPlain, dobby or Jacquard border · hem type and stitch · hanging loop · care label, brand label, embroidery or woven logo
CertificationClaims the product must carryOEKO-TEX® STANDARD 100 · GOTS or OCS for organic · GRS for recycled · Better Cotton
PackingHow units are folded and packedFolding, units per polybag or band, carton quantity and carton marking

Example order lines

  1. Hand towel · 50×100 cm (20 × 39 in) · 100% combed cotton · terry, loops on both faces · pile 16/1 zero-twist · 550 g/m² (16.2 oz/yd²) · garment-dyed pink (Pantone TCX reference) · dobby border · hanging loop · OEKO-TEX® STANDARD 100
  2. Bath towel · 70×140 cm (28 × 55 in) · 100% cotton, carded · terry · pile 20/2 · 500 g/m² (14.7 oz/yd²) · yarn-dyed pink and white stripes · plain hems · OEKO-TEX® STANDARD 100
  3. Beach towel · 90×170 cm (35 × 67 in) · 100% cotton · velour face, terry reverse · 420 g/m² (12.4 oz/yd²) · reactive print, full design · plain hems

Add the quantity per size and color, the delivery date and any testing you require (for example absorbency, color fastness or dimensional stability). Finished sizes vary slightly with shrinkage: agree whether sizes are measured before or after washing, and the tolerance.

At a glance

CategoryBath — towels
FormatsFace, guest, hand, bath, bath sheet, bath mat
Usual fiberCotton (carded or combed)
ConstructionsTerry, velour, waffle, flat-woven
Weight range400–700+ g/m²
Key choicesPile yarn, weight, color method

What to look for

01Match the weight to use: lighter towels dry faster and cost less to launder, heavier ones feel plusher
02Choose two-ply pile (20/2, 24/2) for heavy hospitality laundering; single-ply or zero-twist for softness
03Ask for combed cotton where lint matters
04Check loop density, border straightness and hem stitching on the pre-production sample
05For colored towels in hotels and spas, specify chlorine and wash fastness

Common types

01Face cloth — 30×30 cm (12 × 12 in)
02Guest towel — 30×50 cm (12 × 20 in)
03Hand towel — 50×90 or 50×100 cm (20 × 35, 20 × 39 in)
04Bath towel — 70×140 cm (28 × 55 in)
05Bath sheet — 90×150 or 100×150 cm (35 × 59, 39 × 59 in)
06Bath mat — 50×70 cm (20 × 28 in), heavier terry or flat-woven

Markets & applications

Towels are a core hospitality purchase where plushness competes directly with laundry and drying cost: higher GSM feels luxurious but raises operating expense. Combed and zero-twist long-staple cottons lift softness and absorbency, while waffle serves spa and quick-dry needs. Antimicrobial finishing is used where odor control matters. OEKO-TEX® is standard, with GOTS for organic ranges.

HospitalityHome fashionContractSustainable fashion

Care & maintenance

01Wash warm to hot — up to 140°F (60°C) for hygiene
02Skip fabric softener, which coats loops and cuts absorbency
03Tumble dry medium and shake out to revive the pile
04Wash new towels before first use to reduce lint and set color
05Avoid chlorine bleach on colored towels

Relevant certifications

Frequently asked questions

What do I need to include when ordering towels?+
At minimum: format and size, composition, cotton quality (carded or combed), construction (terry, velour, waffle), pile yarn (count, ply and twist), weight in g/m², color and how it is applied (piece-, garment- or yarn-dyed, or printed), border and hems, labels and any certification such as OEKO-TEX® STANDARD 100. Add quantities per size and color and the delivery date.
What does 16/1 or 20/2 mean on a towel specification?+
It describes the pile yarn: the first number is the yarn count in the English cotton system (Ne), where a higher number is finer; the second is the number of plies. 16/1 is a coarser single yarn, soft and economical; 20/2 or 24/2 is a finer two-ply yarn that keeps its loop and lasts longer under heavy laundering.
What is the difference between terry and velour towels?+
Velour is terry whose loops have been sheared on one face, giving a smooth, velvety surface that shows prints and logos well. The sheared face absorbs a little less, so velour towels usually keep looped terry on the reverse.
What GSM should a hotel towel be?+
Most hospitality programs use about 500–600 g/m² (14.7–17.7 oz/yd²): plush enough to feel generous while keeping laundry weight and drying time under control. Premium properties go to 650–700 g/m² (19.2–20.6 oz/yd²) and above; spas and pools often choose lighter towels that dry faster.
Garment-dyed or yarn-dyed — which should I choose?+
Garment- or piece-dyeing gives a solid color and is the most flexible for small color runs. Yarn-dyeing colors the yarn before weaving and is needed for stripes, checks and multicolor Jacquard designs, with longer lead times and minimums per colorway.

Sourcing towels?

Vanvino® produces and supplies this product for hospitality, contract and home textiles — advice on specification, composition and minimum order quantities.

Request advice
Last updated · Published by Vanvino® · Editorial policy & corrections