Yarn Twist: S & Z, Twist Level, Low-Twist & Zero-Twist
Without twist, loose fibers would simply pull apart. Twist locks them together into a coherent, strong strand. But twist is a balancing act: too little and the yarn is weak and sheds; too much and it becomes wiry, hard and lively. The amount and direction of twist are therefore chosen deliberately for each yarn and fabric.
This guide covers twist direction (S and Z), twist level and its effect on strength and softness, and the special cases of low-twist and zero-twist yarns used for extra-soft, absorbent textiles.
S-twist and Z-twist
Twist direction is named after the central stroke of the letters S and Z. In a Z-twist yarn the spirals run like the middle of the letter Z (bottom-left to top-right); in an S-twist yarn they run the other way, like the middle of the S. Most single spun yarns are Z-twist by convention.
Direction matters when yarns are combined or placed side by side. Plied yarns are usually twisted in the opposite direction to their singles (Z singles plied with S twist) so the forces balance and the yarn lies straight. In weaving, alternating S- and Z-twist yarns, or pairing them, creates subtle light-reflection and texture effects, as in crêpe fabrics.
Twist level and its effects
Twist level is the number of turns inserted per unit length (turns per inch, TPI, or per meter). It is the main lever over a yarn's strength and hand. Up to an optimum, more twist binds the fibers more tightly and increases strength; beyond that optimum, additional twist actually reduces strength and makes the yarn hard, wiry and 'lively' (prone to kinking).
Crucially, twist trades off against softness and absorbency. A higher-twist yarn is stronger, smoother, more lustrous and more resistant to pilling and abrasion, but firmer and less soft. A lower-twist yarn is softer, bulkier and more absorbent, but weaker and more prone to shedding and pilling. The right twist level is a deliberate compromise for the fabric's purpose — crisp poplin wants more twist; a plush towel wants less.
Low-twist and zero-twist yarns
Low-twist yarns are spun with less twist than usual to maximize softness, bulk and absorbency — valued in premium toweling and soft bedding, where a plush, thirsty, cushiony hand matters more than maximum strength.
Zero-twist yarns take this further: they are made with virtually no conventional twist, typically by wrapping the soft fiber bundle with a temporary water-soluble binder yarn that holds it during weaving and is then washed away, leaving an extraordinarily soft, open, absorbent yarn in the finished cloth. Zero-twist towels are prized for being exceptionally soft and absorbent. The trade-off for both is lower strength and a greater tendency to shed or pill, so they rely on good long-staple fiber and careful construction.
Frequently asked questions
What is the difference between S-twist and Z-twist?+
Does more twist make a yarn stronger?+
Why are zero-twist towels so soft?+
Sourcing certified textiles?
Vanvino® can source and document certified textiles and advise on the right standard for your market and project.
Request advice