Beta version — entries are being reviewed and expanded. Corrections are welcome at hello@vanvino.store.
GuideQualityDecision framework

Specifying Textile Quality

How to turn durability and performance into a spec a supplier can hit
A good textile specification is a short list of the right tests, methods and pass/fail values for how the product will actually be used — not every possible test, and not a single headline number. This guide compares the choices buyers most often weigh (Martindale vs Wyzenbeek, strength vs durability, which fastnesses) and gives a framework for writing a specification that protects quality without over-testing.

The common mistakes are specifying one number in isolation ('40,000 rubs' with no method), mixing incompatible systems, or testing everything regardless of use. The fix is to match a handful of requirements to the real stresses the product faces.

Below are the comparisons that come up most, then a framework for building the specification. The individual test pages cover each method in full.

Abrasion

Martindale vs Wyzenbeek

Both rate abrasion resistance for upholstery, but they are different tests and their numbers do not convert. Martindale (ISO 12947) rubs in a multidirectional figure-of-eight and counts 'rubs'; it is the European reference. Wyzenbeek (ASTM D4157) rubs back-and-forth in a straight line and counts 'double rubs'; it is the US reference.

Specify the one your market uses — Martindale for European/global supply, Wyzenbeek for North America — and require both only if the product sells in both regions. Never convert between them.

Different failures

Strength vs durability vs pilling

These measure different failure modes and a fabric can pass one and fail another. Strength tests (tensile, tear, seam slippage, bursting) ask 'will it break or pull apart under load?'. Abrasion (Martindale, Wyzenbeek) asks 'how long before the surface wears through?'. Pilling asks 'will it look worn (bobbled) even if it doesn't wear through?'.

A durable product usually needs a requirement from each relevant group — for example, for contract upholstery: abrasion (Martindale rubs), seam slippage, tensile strength, and pilling grade.

How to decide

A framework for a sound specification

Work from the product's real life, not a checklist:

01Define the use — domestic, heavy-domestic, contract or outdoor — this sets the durability tier and which tests matter.
02Pick the failure modes that matter — abrasion and seam slippage for seating; wash and dimensional stability for bedding; light fastness for curtains; tear for outdoor.
03Choose one method per property — state the standard (ISO/ASTM/AATCC) and conditions; don't mix or convert systems.
04Set pass/fail values — give the minimum (e.g. '≥40,000 rubs ISO 12947', 'pilling ≥4 ISO 12945-2', 'shrinkage ≤3% ISO 5077 after ISO 6330 washing').
05Don't over-test — omit requirements the product will never face; every extra test adds cost and lead time without protecting quality.

Frequently asked questions

Can I convert Martindale rubs to Wyzenbeek double rubs?+
No. They use different motions, abradants and end points, so there is no reliable conversion. Specify whichever standard your market uses — Martindale (ISO) for Europe/global, Wyzenbeek (ASTM) for North America — and require both only if the product sells in both regions.
Which tests should a contract upholstery spec include?+
Typically abrasion (Martindale or Wyzenbeek to the right tier), seam slippage, tensile strength, pilling, and the relevant color fastnesses (especially light and rubbing). Match the exact values to the setting's traffic and exposure.
Is a higher number always better?+
Up to a point. Meeting the tier for the use is what matters; chasing very high abrasion counts or unnecessary tests adds cost and lead time without real benefit. Specify what the product needs, not the maximum possible.

Sourcing certified textiles?

Vanvino® can source and document certified textiles and advise on the right standard for your market and project.

Request advice
Last updated · Published by Vanvino® · Editorial policy & corrections