Mechanical finishSurfacePermanentLeveling
Shearing
Trimming surface fibers or pile to a uniform, even height
Even pile/nap height, clean surface
Shearing is a mechanical finish that trims the surface fibers or pile of a fabric to an even, controlled height using a rotating helical blade against a ledger blade, like a lawn mower for textiles. It levels a raised nap, removes stray fibers, and is essential for cleanly defining pile fabrics such as velvet and carpet.
After raising or on pile fabrics, the surface is often uneven. Shearing passes the fabric under a cylinder of spiral blades that cut protruding fibers to a precise length, producing a smooth, uniform face. The cutting height is adjustable for different effects.
Shearing is permanent and chemical-free. It is used to even out napped fabrics, to clip loose surface fibers for a cleaner finish, and to sculpt or level pile in velvet, velveteen and cut-pile textiles. It frequently follows raising in the finishing sequence.
Technical sheet
TypeMechanical (fiber cutting)
Applied toNapped and pile fabrics
ProcessHelical shearing blades
PermanencePermanent
Primary effectEven pile/nap height, clean surface
Common onVelvet, flannel, wool, cut-pile fabrics
What this finish does
01Levels nap or pile to an even height
02Removes stray and protruding fibers
03Creates a clean, uniform surface
04Can sculpt pile patterns
05Improves definition and appearance
Common uses
01Velvet and velveteen pile leveling
02Finishing raised flannel and wool
03Carpet and upholstery pile
04Cut-pile decorative fabrics
05Cleaning up surface fibers pre-sale
Advantages
01Precise, uniform surface
02Chemical-free
03Essential for quality pile fabrics
04Improves appearance and definition
05Adjustable cutting height
Limitations
01Cutting too close can bare the ground
02Requires precise, well-maintained machinery
03Generates fiber waste
04Only relevant to napped/pile fabrics
05Uneven feeding causes defects
Applications
Shearing is the leveling step that gives napped and pile fabrics their clean, uniform face — the even surface of velvet, the tidy nap of quality flannel, the defined pile of upholstery and carpet. It is mechanical, permanent and chemical-free, and usually follows raising. Precision matters: cut too deep and the fabric ground shows through, so it depends on well-maintained machinery and even feeding.
Home fashionContractHospitalityFashion
Care & durability
01No special care beyond the fabric's own needs
02Protect pile fabrics from crushing
03Brush pile in one direction where relevant
04Avoid abrasion that disturbs the leveled surface
05Follow the base fabric's wash guidance
Sustainability & certifications
Shearing is mechanical and chemical-free. It produces fiber waste that should be collected and, where possible, recycled. Energy use is the main input.
Frequently asked questions
What is shearing used for?+
To trim surface fibers or pile to an even height — leveling a raised nap, cleaning off stray fibers, and defining the pile of velvet, velveteen and cut-pile fabrics for a uniform surface.
Is shearing the same as raising?+
No, they are opposite but complementary. Raising lifts fibers up into a nap; shearing then cuts that nap to an even height. They are often performed in sequence.
Can shearing create patterns?+
Yes. By varying cutting height or using patterned rollers, shearing can sculpt or carve pile fabrics into relief designs, as in some carved velvets and patterned carpets.
Need shearing on your textiles?
Vanvino® can advise you on finishes, performance specifications and minimum order quantities for your project.
Request advice