Beta version — entries are being reviewed and expanded. Corrections are welcome at hello@vanvino.store.
Special techniqueRaised textureVelvetyDecorative

Flock Printing

Bonding tiny fibers to an adhesive design for a raised, velvety texture
Printing (flock/texture)
Flock printing creates a raised, velvety design by printing an adhesive in the shape of the motif and then applying short fibers (flock) that stand upright and bond to the glue, usually with the help of an electrostatic field. The result is a soft, three-dimensional, suede- or velvet-like pattern raised above the fabric surface.

First an adhesive is printed onto the fabric where the design should be. Tiny cut fibers — the flock — are then applied, commonly in an electrostatic field that stands them on end so they embed vertically into the glue. Once cured, the un-glued flock is removed, leaving a dense, upright, velvety pile exactly in the shape of the printed adhesive.

Flock printing is decorative and tactile, adding texture, depth and a plush hand that flat printing cannot, used for feature motifs on cushions, upholstery and decorative home textiles and for soft-touch branding. Its considerations are durability and care: the bond and the flock must withstand use and cleaning, abrasion can wear the pile, and wash and rub resistance depend on adhesive quality. It is a design feature rather than an all-over print method.

At a glance

TypePrinting (flock/texture)
MethodPrinted adhesive + electrostatic flock fibers
Volume suitedMedium (decorative motifs)
Design flexibilityRaised motifs and accents
Hand / feelRaised, velvety, soft-touch
Best forTextured feature motifs, decorative accents

Characteristics

01Flock fibers bonded to printed adhesive
02Electrostatic application stands fibers upright
03Raised, velvety, 3D texture
04Soft, suede-like hand
05A decorative feature, not all-over print

Typical uses

01Feature motifs on cushions
02Velvety accents on upholstery
03Decorative home textiles
04Soft-touch branding and logos
05Textured panels and trims

Strengths

01Distinctive raised, velvety texture
02Adds depth and tactile interest
03Soft, plush hand
04Strong decorative impact
05Works for motifs and accents

Limitations

01Pile can wear with abrasion
02Wash/rub durability depends on adhesive
03Care restrictions for cleaning
04Less suited to very fine detail
05Adhesive and flock add cost

Where it applies

Flock printing adds a raised, velvety, three-dimensional texture — short fibers stood on end and bonded to a printed adhesive — for feature motifs and soft-touch accents on cushions, upholstery and decorative home textiles. It brings depth and a plush hand that flat printing cannot. It is a decorative feature rather than an all-over method: the pile can abrade and wash/rub durability depends on adhesive quality, so care and placement matter.

Home fashionHospitalityContractFashion

Frequently asked questions

How is the velvety flock texture created?+
An adhesive is printed in the shape of the design, then short fibers (flock) are applied — usually in an electrostatic field that stands them upright so they embed vertically in the glue. After curing, the loose flock is removed, leaving a dense, raised, velvet-like pile where the adhesive was.
Is flock printing durable?+
It is decorative, so durability depends on the adhesive and use. The raised pile can wear with heavy abrasion, and wash and rubbing resistance vary with adhesive quality. It suits feature motifs and accents with appropriate care rather than high-abrasion, frequently-laundered applications.
Can flock printing cover a whole fabric?+
It is best for motifs, accents and branding rather than all-over coverage or fine detail. The raised pile and adhesive make large solid areas heavy and less practical, so flock is used as a textural feature within a design.

Sourcing with flock printing?

Vanvino® can source, specify and document textiles to your exact construction and quality requirements.

Request advice
Last updated · Published by Vanvino® · Editorial policy & corrections