Ply structureOne strandLighterSofter
Single Yarn
One strand of spun fibers — the basic yarn, written as /1 in a spec
One strand (ply = 1)
A single yarn is one continuous strand of fibers twisted together — the simplest yarn structure, and the building block of all plied yarns. In a specification the '/1' (as in 40/1) denotes a single yarn. It gives a lighter, softer, often finer fabric than a plied yarn of equivalent count, but with less strength and durability.
After spinning, a single strand of twisted staple or filament is a single yarn. It is used directly in a vast range of fabrics, and it is also the component that is later twisted with others to make plied (folded) yarns. In the common notation, the number after the slash is the ply: '/1' means single.
Fabrics woven or knitted from single yarns are typically lighter, softer and less expensive than those made from plied yarns, but also less strong, less durable and more prone to twisting (skew) and pilling. Most everyday and many premium sheeting fabrics use single yarns; plied yarns are reserved where extra strength, body or a particular hand is wanted.
At a glance
StructureOne strand (ply = 1)
Spec notation/1 (e.g. 40/1)
HandLighter, softer
StrengthLower than plied
CostLower than plied
Best forLight, soft, everyday fabrics
Characteristics
01Single twisted strand
02Lighter, softer fabric
03Lower cost than plied
04Less strong and durable
05More prone to skew and pilling
Typical uses
01Everyday and many premium sheets
02Lightweight apparel and shirting
03Soft, fine single-ply bedding
04Knitted fabrics (jersey, etc.)
05The base strand for plied yarns
Strengths
01Lighter, softer hand
02More economical than plied
03Fine, smooth fabrics possible
04Widely used and available
05Good drape
Limitations
01Lower strength and durability
02More pilling and skew tendency
03Less body than plied
04Can look thinner at high counts
Where it applies
Single yarn — one twisted strand, written '/1' in a spec — is the basic, economical, softer yarn behind most everyday and many premium sheeting fabrics, lightweight apparel and knits. It gives a lighter, softer, well-draping fabric at lower cost than plied yarn, at the price of some strength and durability and a greater tendency to pill or skew. It is also the component from which plied yarns are built.
Home fashionHospitalitySustainable fashionFashion
Frequently asked questions
What does /1 mean in a yarn or fabric spec?+
The number after the slash is the ply. '/1' means a single yarn — one strand. So '40/1' is a single yarn of count Ne 40. '40/2' would be two such strands plied together.
Is single-ply or two-ply better for sheets?+
Neither is universally better. Fine single-ply sheets are light, soft and breathable and can be excellent; two-ply can add strength and body but also weight and cost, and is sometimes used to inflate thread-count numbers. Quality depends more on fiber and yarn fineness than on ply alone.
Are single yarns weaker?+
Yes, a single yarn is weaker than a plied yarn made from the same strands, and tends to pill and skew more. For many light, soft fabrics this is an acceptable trade for a softer, lighter, cheaper result.
Sourcing with single yarn?
Vanvino® can source, specify and document textiles to your exact construction and quality requirements.
Request advice