Beta version — entries are being reviewed and expanded. Corrections are welcome at hello@vanvino.store.
Color fastnessSweatGray Scale 1–5ISO 105-E04

Perspiration Fastness

How well color resists sweat — tested in acidic and alkaline conditions
Color fastness property
Perspiration fastness measures how well a textile's color resists the effect of sweat. Because perspiration can be both acidic and alkaline, the test exposes specimens to artificial acid and alkaline perspiration solutions under warmth and pressure, then rates color change and staining of an adjacent multifiber fabric on the 1–5 gray scale.

In the standard test (ISO 105-E04) specimens are soaked in acid and alkaline synthetic perspiration, stitched to a multifiber adjacent fabric, then held under a defined weight at body-like temperature for several hours. Afterwards the specimen's color change and the staining of each adjacent fiber are rated on the gray scale (5 best, 1 worst).

It is relevant to any textile in body contact — bedding, pillowcases, towels and apparel — where sweat could cause color to change or bleed onto skin or adjacent fabrics. Some dye–fiber combinations are sensitive to pH, so both acid and alkaline results matter. Good perspiration fastness goes hand in hand with wash fastness and depends on stable dye selection and thorough removal of unfixed dye.

At a glance

TypeColor fastness property
What it testsColor change & bleed from sweat
StandardISO 105-E04
ScaleGray scale 1–5 (5 best)
Typical requirement≈4 or higher (acid & alkaline)
NoteTested in both acid and alkaline sweat

Characteristics

01Rates color resistance to sweat
02Tested in acid and alkaline conditions
03Uses a multifiber adjacent fabric
04Color change and staining rated 1–5
05Relevant to body-contact textiles

Typical uses

01Pillowcases and bed linen
02Towels and bathrobes
03Apparel and base layers
04Body-contact home textiles
05Specifying dyed-fabric quality

Strengths

01Covers real body-contact conditions
02Tests both sweat pH types
03Standardized 1–5 rating
04Flags skin/adjacent staining risk
05Complements wash fastness

Limitations

01Lab sweat approximates real perspiration
02pH-sensitive dyes may vary between tests
03Does not cover light or rubbing fastness
04Needs correct multifiber and method
05One property among several

Where it applies

Perspiration fastness matters for anything worn or slept against — pillowcases, bed linen, towels and apparel — where sweat could change the color or bleed it onto skin and adjacent fabrics. Because perspiration is both acidic and alkaline, both are tested, and buyers typically require around 4 or higher. It depends on stable, pH-robust dye selection and thorough wash-off of unfixed dye, and goes together with good wash fastness.

Home fashionHospitalityContractFashion

Frequently asked questions

Why test perspiration in both acid and alkaline forms?+
Human sweat can be both acidic and alkaline, and some dye–fiber combinations react differently to each. Testing both (ISO 105-E04) ensures the color is stable across the real range of perspiration a textile will meet in use.
Which products most need good perspiration fastness?+
Body-contact textiles — pillowcases, bed linen, towels and apparel — where sweat could cause the color to change or transfer onto skin or other fabrics. A rating around 4 or higher is typically specified.
Is perspiration fastness related to wash fastness?+
Often, but not reliably — both depend on stable dye selection and removal of unfixed dye, yet they are different exposures, so each has to be tested and specified separately.

Sourcing with perspiration fastness?

Vanvino® can source, specify and document textiles to your exact construction and quality requirements.

Request advice
Last updated · Published by Vanvino® · Editorial policy & corrections
Sources: AATCC · ISO