DigitalAny fiberLow waterBinder-fixed
Pigment Digital Printing
Inkjet printing with pigment inks — simple, low-water, fiber-flexible
Digital inkjet (pigment inks)
Pigment digital printing is inkjet textile printing using pigment inks, which are fixed by heat-curing a binder rather than by bonding with the fiber. Because it needs no steaming or washing-off and works on many fibers, it is the simplest, lowest-water digital printing route — at the cost of a slightly firmer hand and binder-dependent rub fastness.
Pigment inks carry insoluble color that has no affinity for the fiber, so after jetting the print it is simply dried and heat-cured to set a binder that holds the pigment on the surface. There is no steaming and no wash-off, which dramatically simplifies the process and cuts water and effluent compared with reactive digital printing.
This simplicity and fiber-independence (it prints cotton, blends, linen and more) make pigment digital printing fast-growing for home textiles, especially where sustainability and quick turnaround matter. The limitations come from the surface binder: the hand can be slightly firmer than reactive-printed cotton, and wash and rubbing (crocking) fastness depend on binder quality and correct curing. Light fastness is typically excellent.
At a glance
TypeDigital inkjet (pigment inks)
MethodInkjet + heat-cure (no wash-off)
Volume suitedShort to medium (no screens)
Design flexibilityUnlimited color & detail
Hand / feelSlightly firmer (surface binder)
Best forLow-water digital prints, mixed fibers
Characteristics
01Inkjet pigment inks, binder-fixed
02No steaming or washing-off needed
03Low water and effluent
04Works on many fibers
05Excellent light fastness
Typical uses
01Low-water digitally printed home textiles
02Mixed-fiber and linen prints
03Quick-turnaround and sustainable ranges
04Short-run and custom designs
05Light-fast printed furnishings
Strengths
01Simplest digital process (no wash-off)
02Low water and effluent use
03Fiber-flexible (cotton, linen, blends)
04Unlimited colors and detail
05Excellent light fastness
Limitations
01Slightly firmer hand (surface binder)
02Rub (crocking) fastness binder-dependent
03Wash fastness varies with binder/cure
04Less deep than bonded dye color
05Curing control is critical
Where it applies
Pigment digital printing is the simplest, lowest-water digital route — jet the design, heat-cure the binder, done, with no steaming or washing-off and the freedom to print cotton, linen and blends alike. That makes it attractive for sustainable, quick-turnaround home textiles and short runs, with excellent light fastness. The surface binder means a slightly firmer hand than reactive-printed cotton and rub/wash fastness that depend on binder quality and correct curing.
Home fashionHospitalitySustainable fashionFashion
Frequently asked questions
Why is pigment digital printing lower-water?+
Because the pigment is fixed by heat-curing a binder, not by bonding with the fiber, it needs no steaming and no washing-off. Eliminating those wet steps removes most of the water and effluent that reactive digital printing requires.
What are the trade-offs of pigment digital printing?+
The color sits on the surface in a binder, so the hand can be slightly firmer than reactive-printed cotton, and rubbing (crocking) and wash fastness depend on binder quality and correct curing. Light fastness is typically excellent, and it works on many fibers.
Can pigment digital printing print any fabric?+
Largely yes — because pigments have no fiber affinity and are bound to the surface, it prints cotton, linen, blends and more, unlike reactive digital printing which is limited to cellulosics. The right pre-treatment and curing are still needed for good fastness.
Sourcing with pigment digital printing?
Vanvino® can source, specify and document textiles to your exact construction and quality requirements.
Request advice