Beta version — entries are being reviewed and expanded. Corrections are welcome at hello@vanvino.store.
GuideDevelopmentLab dips & strike-offs

Fabric Development

Developing the actual cloth — lab dips, strike-offs and getting the base right
Fabric development is the technical work of creating the specific cloth a product needs: selecting or engineering the base fabric, then approving its color and print through lab dips and strike-offs before any bulk is made. It is where the material is proven to match the design intent.

Where product development defines what the product should be, fabric development makes the cloth real. It covers engineering or selecting the base construction, then the color and surface approvals — lab dips for solid colors, strike-offs for prints — that confirm the mill can hit the agreed standard in the agreed fiber and construction.

This stage lives between design and production, and getting it right is what makes sampling predictable. This guide covers the base fabric, color and print approvals, and the hand-feel standard.

The base fabric

Engineering or selecting the cloth

Most development starts from an existing quality the mill runs, adjusted to the spec, rather than a blank sheet — it is faster, cheaper and lower-risk. Where a genuinely new construction is needed, the mill develops it to the target weight, hand and performance, which takes longer and carries minimums.

The key decisions are the same ones from product development made concrete: fiber and yarn, weave or knit, weight and finish. The fabric chapters document the options the base is chosen from.

Color & print approvals

Lab dips and strike-offs

Color and print are approved on the actual fabric before bulk, because the same dye reads differently on different fibers and constructions:

01Lab dip — a small swatch dyed to a target color (often a Pantone or physical standard) for approval before bulk dyeing.
02Strike-off — a trial run of a print design on the actual fabric, to approve color, register and scale.
03Fastness check — confirming the approved color also meets wash, light and rub fastness, not just the shade.
The reference standard

Setting the hand-feel standard

Alongside color, development fixes the physical reference: an approved swatch or 'standard' that defines the agreed hand, weight and finish. Bulk is then checked against it. Without a signed physical standard, 'soft' and 'premium' are arguments waiting to happen.

Once base, color, print and hand are approved, the product is ready for full sampling and approvals.

Frequently asked questions

What is a lab dip?+
A small swatch of the actual fabric dyed to a target color and submitted for approval before the mill dyes bulk. It confirms the shade on the real fiber and construction, since the same dye reads differently across materials.
What is a strike-off?+
A trial print of a design on the actual production fabric, used to approve the print's color, register and scale before bulk printing. It is the print equivalent of a lab dip.
Why insist on a signed physical standard?+
Because words like 'soft' or 'premium' are subjective. An approved swatch defining the agreed hand, weight, color and finish gives both sides an objective reference to check bulk against, preventing disputes.

Sourcing certified textiles?

Vanvino® can source and document certified textiles and advise on the right standard for your market and project.

Request advice
Last updated · Published by Vanvino® · Editorial policy & corrections