Beta version — entries are being reviewed and expanded. Corrections are welcome at hello@vanvino.store.
GuideSamplingApprovals

Sampling & Approvals

The sample stages — proto, SMS, pre-production and top-of-production — that de-risk a bulk order
Sampling is the staged approval process that proves a product before bulk: a sequence of samples — prototype, salesman (SMS) and size-set samples, pre-production and top-of-production — each confirming a different thing, from look to exact production conditions. Disciplined sampling is the cheapest insurance against a wrong bulk order.

No responsible buyer orders bulk off a drawing. Sampling steps a product from first idea to approved production in defined stages, each answering a specific question: does it look right, does it fit the range, can the nominated factory make it correctly, and does the first bulk off the line match what was approved?

Skipping stages to save time almost always costs more than it saves. This guide sets out the standard sample stages and what each one approves.

The sample stages

What each sample proves

Sampling follows a sequence, and each stage approves something the previous one could not:

01Prototype (proto) — the first physical sample — proves the concept, look and basic construction; often not yet in final fabric.
02Salesman sample (SMS) — a refined sample in correct fabric and color, used to sell and confirm the range before ordering; where a product comes in several sizes, a separate size-set sample checks the grading.
03Pre-production (PP) — made in the actual factory with bulk materials and methods — the key sign-off before production starts.
04Top-of-production (TOP) — pulled from the first bulk run to confirm production matches the approved PP sample.
The decisive stage

Why the PP sample is the one that counts

The pre-production sample is the single most important approval: it is made in the nominated factory, with the bulk fabric, trims and methods that will actually be used. Approving it means you have seen the real product the line will produce, not an idealized sample room version. Bulk should never start before PP approval.

The top-of-production sample then closes the loop, catching any drift between the approved PP and what the line actually makes once running at volume.

Frequently asked questions

What is the difference between a proto and a PP sample?+
A prototype proves the concept and look, often before the final fabric is ready. A pre-production (PP) sample is made in the actual factory with bulk materials and methods, so it represents what the line will really produce — it is the sign-off before production.
Can sampling stages be skipped to save time?+
They can, but it transfers risk to bulk, where mistakes are far more expensive. The PP sample in particular should never be skipped — it is the only stage that proves the real factory can make the product correctly.
What does a top-of-production (TOP) sample catch?+
Drift between the approved PP sample and the actual bulk run — subtle shifts in color, construction or finish that appear once the line runs at volume. It confirms production matches what was signed off.

Sourcing certified textiles?

Vanvino® can source and document certified textiles and advise on the right standard for your market and project.

Request advice
Last updated · Published by Vanvino® · Editorial policy & corrections