Continuous filamentSmoothStrongLustrous
Filament Yarn
Yarn made from continuous filaments — smooth, strong, lustrous
Continuous filament(s)
A filament yarn is made from one or more continuous filaments — long, unbroken strands — rather than short staple fibers. Silk is the only natural filament; synthetics (polyester, nylon, viscose) and lyocell are extruded as filaments. With no fiber ends along its length, filament yarn is smooth, strong, lustrous and low-hairiness, and can be very fine.
Where staple yarns are spun from short fibers twisted together, filament yarns are built from continuous strands that run the whole length of the yarn. A monofilament is a single filament; a multifilament bundles many fine filaments together, often with a little twist to hold them.
Because there are virtually no fiber ends to protrude, filament yarns are smooth, sleek and lustrous, strong, and resist pilling. They drape fluidly and can be extremely fine. The flip side is a cooler, slicker, less 'cottony' hand and, in dense constructions, lower breathability unless textured or engineered; untextured 'flat' filament yarn looks shiny and feels smooth, which is why many apparel and lining filament yarns are textured to add bulk and softness.
At a glance
StructureContinuous filament(s)
SourcesSilk; polyester, nylon, viscose, lyocell
HandSmooth, sleek, lustrous
StrengthHigh
HairinessVery low (no fiber ends)
Best forSmooth, lustrous, strong fabrics
Characteristics
01Smooth, sleek surface
02Natural luster and sheen
03High strength, low hairiness
04Resists pilling
05Can be extremely fine; drapes fluidly
Typical uses
01Silk and satin fabrics
02Linings and smooth apparel
03Lustrous decorative textiles
04Microfiber and performance fabrics
05Sheer and fine filament fabrics
Strengths
01Smooth, lustrous, premium look
02Strong and durable
03Low hairiness and pilling
04Fluid drape
05Can be very fine
Limitations
01Cooler, slicker, less absorbent hand
02Lower breathability unless textured
03Snags can run/ladder
04Shiny look not always wanted
05Mostly silk or man-made (few natural options)
Where it applies
Filament yarn — continuous strands rather than short fibers — is behind smooth, lustrous, strong, low-pilling fabrics: silk and satin, linings, sleek apparel and microfiber. With virtually no fiber ends it is sleek and sheeny and drapes fluidly, and can be spun very fine. Its hand is cooler and slicker and less absorbent than staple yarn, so filament yarns for apparel and home textiles are often textured to add bulk, softness and breathability.
Home fashionHospitalityContractFashion
Frequently asked questions
What is the difference between filament and staple yarn?+
Filament yarn is made from continuous, unbroken strands (like silk or extruded synthetics), so it is smooth, lustrous, strong and low-hairiness. Staple yarn is spun from short fibers twisted together, giving a softer, fuller, warmer, more 'cottony' but hairier yarn. Silk is the only natural filament;
cotton,
wool and
linen are staple.
What is the difference between monofilament and multifilament?+
A monofilament yarn is a single continuous filament (as in fishing line or some sheers); a multifilament bundles many fine filaments together, usually with slight twist, giving a softer, more flexible, more fabric-like yarn used in most apparel and home textiles.
Why does filament yarn look shiny?+
With no protruding fiber ends, light reflects evenly off the smooth, continuous surface, giving luster. Where a matte, bulkier, softer hand is wanted, the filament yarn is textured (crimped) to break up the surface and add bulk.
Sourcing with filament yarn?
Vanvino® can source, specify and document textiles to your exact construction and quality requirements.
Request advice