Beta version — entries are being reviewed and expanded. Corrections are welcome at hello@vanvino.store.
GuideSpinning processFiber to yarn

From Fiber to Yarn: The Spinning Process

The step-by-step journey that turns a mass of loose fiber into usable yarn
Turning raw fiber into yarn is a sequence of refining steps — opening and cleaning, carding, (optionally) combing, drawing, spinning and winding — each of which makes the fiber mass cleaner, more parallel and finer until it can be twisted into a continuous strand. Understanding this sequence explains why yarns differ in strength, fineness, evenness and hand.

Every staple yarn begins as a tangled, dirty mass of short fibers and ends as a fine, twisted, continuous strand. Between the two lies a chain of mechanical steps that progressively open, clean, align and thin the fibers. Each step removes impurity or irregularity and adds order.

The choices made along the way — whether to comb, how much to draw, which spinning system to use, how much twist to insert — determine the yarn's final character. This guide walks the main stages so a spec like 'combed, ring-spun, Ne 40' becomes readable as a set of decisions about quality.

Start here

  1. Ring-Spun YarnThe reference spinning system for quality cotton yarn.
  2. Combed YarnWhy combing makes finer, smoother, stronger yarn.
  3. Yarn Count & Numbering SystemsNe, Nm, tex and denier — reading yarn fineness.
  4. Yarn Twist: S & Z, Twist Level, Low-Twist & Zero-TwistHow twist sets strength and softness.
The sequence

The main stages of spinning

For staple (short-fiber) yarns such as cotton, the process runs through these stages, in order:

01Opening & cleaning — the pressed fiber bales are opened and loosened, and trash, dust, seeds and short impurities are removed. The fiber is turned into a light, clean, airy mass ready to process.
02Carding — the cleaned fiber passes over wire-covered rollers that disentangle it, remove more impurities and short fibers, and lay it into a thin web, then condense it into a soft rope called a sliver. Carding is the heart of yarn preparation for cotton-type spinning; long-staple flax follows a different route of hackling and wet spinning.
03Combing (optional) — for finer, cleaner yarns, the carded sliver is combed to remove the shortest fibers (the 'noil') and lay the long fibers parallel. Combing is what separates premium combed yarn from economical carded yarn.
04Drawing — several slivers are drawn out and doubled together through rollers. This blends the fibers, straightens them further and evens out thick-and-thin variation, giving a more regular sliver.
05Spinning — the drawn strand is drafted (thinned) to its final fineness and twisted into yarn. The spinning system — ring, open-end (rotor) or compact — sets the yarn's strength, fineness and hand.
06Winding — the spun yarn is wound onto packages (cones or bobbins), and faults are cleared, ready for weaving, knitting or further twisting (plying).
Why it matters

How the process shapes the yarn

Each stage leaves its mark on the final yarn. Thorough cleaning and combing remove the short fibers and impurities that cause weakness, hairiness and unevenness — which is why combed yarns are smoother, stronger and finer than carded ones. Drawing determines regularity; more doubling gives a more even yarn.

The spinning system then sets the character: ring spinning for fine, soft, strong yarns; open-end for bulky, even, economical yarns; compact spinning for the cleanest, strongest, lowest-hairiness yarns. Reading these choices off a yarn specification tells you most of what you need to know about the fabric it will make.

Frequently asked questions

What is the difference between carding and combing?+
Carding disentangles and cleans the fiber and forms it into a sliver — every yarn is carded. Combing is an extra step that removes the shortest fibers and lays the long fibers parallel, producing a finer, smoother, stronger yarn. Carded-only yarn is more economical; combed yarn is premium.
What does 'drawing' do in spinning?+
Drawing draws out and doubles several slivers together through rollers. It blends and straightens the fibers and evens out thick-and-thin variation, giving a more regular sliver — which is essential for an even, strong final yarn.
Does every yarn go through all these steps?+
All staple yarns are opened, cleaned, carded, drawn, spun and wound. Combing is optional and used only for finer, higher-quality yarns. Filament yarns (like polyester or silk) skip staple spinning entirely — they are extruded or reeled as continuous strands and then, if needed, textured or twisted.

Sourcing certified textiles?

Vanvino® can source and document certified textiles and advise on the right standard for your market and project.

Request advice
Last updated · Published by Vanvino® · Editorial policy & corrections