Beta version — entries are being reviewed and expanded. Corrections are welcome at hello@vanvino.store.
GuidePrinting fundamentalsDigital workflow

Understanding Textile Printing

How printing puts a design on fabric — traditional vs digital, preparation, fixation and washing
Textile printing applies a localized design to fabric — color only where the pattern is, rather than an all-over shade. It splits into traditional methods (block, screen, rotary screen, roller), which apply color through blocks or screens, and digital inkjet methods, which jet the design from print heads. Most methods share the same logic: the fabric is prepared, the color is fixed, and any unfixed color is washed off — though pigment printing skips the wash-off, curing the binder-bound pigment with heat instead.

Choosing a printing method is really about matching the design, the fabric, the volume and the required durability. A ten-color heritage motif at volume, a photographic one-off and a hand-crafted artisanal piece call for completely different routes.

This guide explains the fundamentals shared across methods — how traditional and digital printing differ, and the preparation, fixation and washing steps that decide print quality and fastness — so the individual method pages and the comparison guide make sense together.

Start here

  1. Screen PrintingThe classic method for strong spot color.
  2. Rotary Screen PrintingHigh-volume printing for bedding and furnishings.
  3. Reactive Digital PrintingInkjet printing on cotton, without screens.
  4. Choosing a Textile Printing MethodMatching method to design, volume and fiber.
The basics

What textile printing is

Printing applies colorant (dye or pigment, carried in a print paste or ink) to specific areas of fabric to form a design, as opposed to dyeing, which colors the whole cloth one shade. The art is getting the color exactly where the design wants it, in register, with the right penetration, hand and fastness.

Hand printing — block printing and hand screen printing — is the artisanal end, valued for its craft character. Mechanized methods (rotary screen, roller) and digital inkjet scale that up with different trade-offs in speed, color count, detail and flexibility.

The two families

Traditional vs digital printing

Traditional methods apply each color through its own block or screen. They give strong, opaque, well-penetrated color and are very economical at volume for limited-color designs, but each color adds setup cost, and short runs or frequent changes are expensive.

Digital inkjet printing jets the design straight from print heads with no screens, so it handles unlimited colors, photographic detail and economical short runs with no per-color setup — ideal for sampling, customization and complex art. Its trade-offs are slower speed and higher cost per meter at large volume, and the need for the right ink and fixation for the fiber.

01Traditional (screen/rotary/roller) — strong opaque color, economical at volume, limited color count, per-color setup.
02Digital inkjet — unlimited color and detail, economical short runs, no screens, higher cost at high volume.
Before printing

Print preparation

Fabric usually needs preparing before it can be printed well. For digital printing especially, a pre-treatment is applied so the ink sits and penetrates correctly rather than bleeding — the pre-treatment is matched to the ink type (reactive, pigment, disperse) and the fiber.

Good preparation controls sharpness (no feathering), color yield and penetration. Skipping or mismatching it is a common cause of dull, bleeding or poorly fixed prints.

After printing

Fixation & washing

Printing color on is only half the job — it has to be fixed. Reactive inks and most dye-based prints are fixed by steaming, which drives the dye to bond with the fiber; pigment prints are fixed by heat-curing a binder; sublimation bonds disperse dye into polyester by heat. Each fiber–ink pairing has its own fixation.

After dye-based printing and fixation, the fabric is washed to remove unfixed color and residual pre-treatment or thickener — the step that secures wash and rubbing fastness and a clean hand. Pigment and sublimation prints skip the wash-off (nothing to remove), which is why pigment digital printing is lower-water. Correct fixation and washing are what separate a durable print from one that bleeds and crocks.

Frequently asked questions

What is the difference between traditional and digital printing?+
Traditional methods (block, screen, rotary screen, roller) apply each color with its own block, screen or engraved roller, giving strong color and low unit cost at volume but a per-color setup and a limited color count. Digital inkjet jets the design with no screens, allowing unlimited colors, photographic detail and economical short runs, at higher cost per meter for very large volumes.
Why do printed fabrics need steaming or curing?+
To fix the color. Dye-based prints (including reactive) are steamed so the dye bonds with the fiber; pigment prints are heat-cured to set a binder that holds the color on the surface; sublimation uses heat to bond disperse dye into polyester. Without the right fixation, the print would not be wash- or rub-fast.
Why is some printed fabric washed after printing and some not?+
Dye-based prints are washed after fixation to remove unfixed dye and residual chemicals, which secures fastness and a clean hand. Pigment and sublimation prints have nothing loose to wash off — the pigment is bound to the surface and the sublimation dye is inside the fiber — so they skip the wash-off, which also makes pigment printing lower-water.

Sourcing certified textiles?

Vanvino® can source and document certified textiles and advise on the right standard for your market and project.

Request advice
Last updated · Published by Vanvino® · Editorial policy & corrections