Color performance is how well a textile keeps its color in use — resisting fading and bleeding when washed, exposed to light, rubbed or subjected to sweat and chlorine. Each of these is measured as a 'color fastness' and graded on a scale, and together they decide whether a product still looks right after months of real use. This guide frames color performance for quality specification and points to the individual fastness tests.
A beautiful color is worthless if it fades after three washes or rubs off onto a sofa. Color fastness turns that risk into specifiable, graded requirements — which is why buyers put fastness targets into every serious specification.
Most fastness tests are graded on two 1-to-5 gray scales — one for change in the color itself and one for staining of adjacent white fabric, where 5 is best (no change / no staining) — while light fastness is graded 1–8 against blue wool references. The main fastnesses are covered in detail in the dyeing section; below is how they fit together and how to specify them.
The main fastnesses
What color performance covers
Color performance is the sum of several separate fastness tests, each simulating a real exposure. The key ones for home, hospitality and fashion textiles are:
01Wash fastness — resistance to fading and bleeding in laundering — the first thing to specify for anything washed (ISO 105-C06 / AATCC 61).
02Light fastness — resistance to fading from light exposure, graded 1–8; critical for curtains, upholstery and outdoor textiles (ISO 105-B02).
03Rubbing (crocking) fastness — resistance to color rubbing off, tested dry and wet; vital for deep shades and upholstery (ISO 105-X12).
04Perspiration fastness — resistance to sweat, acid and alkaline; matters for apparel and next-to-skin textiles (ISO 105-E04).
05Chlorine & water fastness — resistance to chlorinated water (pool, bleach) and to plain water; relevant to toweling and hospitality linen (ISO 105-E03 / E01).
How to specify
Setting fastness requirements
Match the fastness targets to how the product is used and expose only the ones that matter. Bedding and apparel need strong wash, rubbing and perspiration fastness; curtains, upholstery and outdoor textiles live or die by light fastness; toweling and poolside textiles need chlorine and water fastness. Deep and bright shades are the hardest to get fast, so they deserve the tightest targets.
A sound specification states the fastness, the method, and the minimum grade — for example 'color fastness to washing ≥4 (ISO 105-C06)' and 'light fastness ≥5 (ISO 105-B02)'. Because the color-change and staining scales are separate, give the required grade for each where relevant.
Frequently asked questions
What do color-fastness grades mean?+
Most fastnesses use a 1-to-5 scale (light fastness uses 1-to-8), graded against reference scales — one for change in the fabric's own color and one for staining of adjacent white fabric. Higher is better: 4–5 is a common acceptance target for washing, rubbing and perspiration.
Which fastness matters most?+
It depends on use. Washed products need wash, rubbing and perspiration fastness; curtains, upholstery and outdoor textiles need light fastness above all; toweling and poolside textiles need chlorine and water fastness. Specify the ones the product will actually face.
Why are dark colors harder to keep fast?+
Deep and bright shades carry much more dye, so any loss shows more and there is more color available to rub off or bleed. They are the hardest to make fast and usually warrant the tightest fastness targets.
Sourcing certified textiles?
Vanvino® can source and document certified textiles and advise on the right standard for your market and project.
Request advice