Beta version — entries are being reviewed and expanded. Corrections are welcome at hello@vanvino.store.
GuideTestingISO · ASTM · AATCC

Textile Testing Standards (ISO, ASTM, AATCC)

Who writes textile test methods, how they differ, and how to read a test spec
A textile performance figure only means something if you know which test produced it. Three bodies write most of the methods buyers meet — ISO (international), ASTM (United States) and AATCC (US, color and chemical) — and their methods are not interchangeable. This guide explains who writes what, how to read a test reference, and why the standard must always be stated alongside the number.

A specification that says '30,000 rubs' or 'colorfastness 4' is incomplete without the method behind it. The same property can be measured several ways that give different numbers, so the standard code is part of the result, not an optional extra.

Here are the main standards bodies, how their references are structured, and the practical rules for reading and writing a test specification.

Start here

  1. Tensile StrengthThe basic measure of fabric strength.
  2. Martindale AbrasionHow abrasion resistance is rated for upholstery.
  3. Pilling ResistanceTesting and grading surface pilling.
  4. Dimensional Stability (Shrinkage)Measuring and controlling shrinkage.
Who writes the methods

The main standards bodies

Most textile test methods in home, hospitality, contract and fashion come from three organizations:

01ISO — the International Organization for Standardization — globally recognized methods (e.g. ISO 12947 Martindale abrasion, ISO 105 color fastness, ISO 13934 tensile). The common reference outside the US.
02ASTM — ASTM International — the dominant US methods (e.g. ASTM D4157 Wyzenbeek abrasion, ASTM D5034 grab tensile). Standard for North American supply chains.
03AATCC — the American Association of Textile Chemists and Colorists — US methods focused on color and chemical performance (e.g. AATCC 61 wash fastness, AATCC 16 light fastness, AATCC 135 shrinkage).
04Others — regional and sector bodies (EN European norms, BS, DIN, GB in China, plus brand and retailer protocols) that often adopt or adapt ISO methods.
How to read a code

Reading a test reference

A method is cited by body, number and often a part and year — for example 'ISO 12947-2:2016'. The number identifies the method, the part (‑2) a specific variant or procedure, and the year the edition. A result should quote the method, the relevant conditions (load, cycles, temperature) and the end point used, because these change the figure.

Equivalent methods across bodies measure the same property but rarely give identical numbers: ISO 12947 (Martindale) and ASTM D4157 (Wyzenbeek) both rate abrasion, yet their counts cannot be converted. So comparisons are only valid within the same method.

Practical rules

Writing a sound specification

A specification that travels well across suppliers and regions follows a few habits:

01State the method — always cite the standard code (and part/year) next to every requirement, not just the number.
02State the conditions — include load, cycles, temperature and the failure end point where the method allows options.
03Don't mix systems — specify one method per property; never convert Martindale rubs to Wyzenbeek double rubs or ISO fastness to a different scale.
04Match the market — use ISO for European/global supply, ASTM/AATCC for US supply, or require both where the product sells in both.
05Define pass/fail — give the acceptance value (e.g. '≥40,000 rubs ISO 12947', 'color fastness to washing ≥4 ISO 105-C06').

Frequently asked questions

Are ISO, ASTM and AATCC methods interchangeable?+
No. They measure the same properties but with different equipment, conditions and end points, so their numbers are not interchangeable and generally cannot be converted. A result is only comparable to another produced by the same method, which is why the standard code must always be stated.
Which standard should I specify?+
Match the market: ISO for European and most global supply chains, ASTM and AATCC for North America. Where a product sells in both regions, require testing to both relevant methods rather than trying to convert between them.
What does something like 'ISO 12947-2:2016' mean?+
The body (ISO), the method number (12947, Martindale abrasion), the part (‑2, a specific procedure), and the edition year (2016). Citing all of it — plus the test conditions and end point — makes a requirement unambiguous.

Sourcing certified textiles?

Vanvino® can source and document certified textiles and advise on the right standard for your market and project.

Request advice
Last updated · Published by Vanvino® · Editorial policy & corrections